Product Description
This unit can be used as a Proximity Detector or as a Trigger Object Detector. Also built into this unit is a Temperature Change Sensor.
It detects near-by objects and alerts of any changes using both visual LEDs and a loud audible alarm.
The sound for both proximity and temperature detection can easily be disabled as to not interfere with EVP sessions.
- Rather than use the antenna, you can plug in an AUX cable in the antenna port and wrap it around an object – i.e. a toy or whatever item you wish to check.
- The unit comes included with:
- Proximity Detector
- Mini Tripod
- Extendable Antenna
The temperature change sensor has three modes:
- 15-Second Rolling Average Sample
- This mode continuously samples, and keeps an average from the last 15 seconds. The unit then compares the current reading from the sensor to the average, and alerts of any drastic changes.
- One Time Sample / Manual Re-sample
- This mode takes a sample only just after turning the unit on, and compares any subsequent readings from the sensor to that, and alerts of any differences.
- 30-Second Automatic Re-sample
- This mode is similar to the Single Shot Manual Re-sample mode, but automatically re-samples after every 30 seconds, and alerts of any differences.
Note: The included tripod style will vary by stock.
As these devices are individually hand-built, the overall look and design may vary between units, and change slightly from time to time. The operation of the device will remain the same.
yurabeloved (verified owner) –
Received the product in good condition , tested and werking well, the customer service also good and helpful when i email them so thumbs up for everything 😊👍.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal